Sonex -- The Sport Aircraft Reality Check!
B-Model Home AeroConversions Home Sonex Home Sonex Home
 

SONEX
WAIEX
XENOS
ONEX
SUBSONEX
AeroVee
AeroConversions Accessories

Optional Machined Angle Component Kits

Sonex Aircraft, LLC is pleased to announce the introduction of another new labor saving Sonex Aircraft Complete Airframe Kit Upgrade Option: Machined Angle Components. The Machined Angle Component Kit almost completely eliminates the need to fabricate parts from raw 6061-T6 aluminum angle extrusion,* thus saving the builder approximately 200 hours or more of construction time! The Machined Angle Component Kit can be used in combination with the recently introduced Optional Pre-Assembled Main Wing Spars to offer a total build time reduction of approximately 200-300 hours. The Sonex Machined Angle Component Kit includes 72 parts (Waiex includes 83), including all pilot holes specified in the aircraft plans, deburred and finished using a tumbler (some touch-up finish work may be required prior to installation).

NEW!!!
A Machined Angle Component Kit is now available for the Xenos, saving approximately 100 hours of work. Note that these are only parts common among Xenos, Sonex and/or Waiex (Qty 43 parts illustrated in table below). There are Qty 48 Xenos-specific parts that Xenos builders must fabricate from raw extruded aluminum angle stock.

With these two new Complete Airframe Kit options, Sonex Aircraft are now easier to build than ever before, rivaling the build times of some competitors’ quick-build kits, while retaining full compliance with the FAA’s Experimental Amateur-built “Major Portion” regulations.


All parts shipped with a high-level of finish.
(Click for Enlarged Sample)

*Parts not included in Sonex Machined Angle Component Kits: SNX-C02-03L&R, SNX-C04-07, SNX-D02-13, SNX-D02-22, SNX-D02-23, SNX-F03-04 (Qty 2), SNX-F15-08 (Qty 2), SNX-F26-02L&R, SNX-F26-03L&R, SNX-F26-08 (Qty 2), SNX-W11-03 (Qty 4), SNX-W14-02 (Qty 20).

*Parts not included in Waiex Machined Angle Component Kits: WIX-C04-04L&R, WIX-C04-06, WIX-D02-13, WIX-D02-22, WIX-D02-23, WIX-F03-04 (Qty 2), WIX-F15-08 (Qty 2), WIX-F27-02L&R, WIX-F27-03L&R, WIX-L05-05, WIX-W11-02 (Qty 20), WIX-W11-03 (Qty 4).

NEW: July 2011
Machined Angle Component Kit available as upgrade option for the new Onex Single-Place aircraft.

Machined Angle Component Options
Onex Complete Airframe Kit Upgrades:
  • Machined Angle Compenent Kit-Onex Upgrade: $2,250
Sonex Complete Airframe Kit Upgrades:
  • Machined Angle Compenent Kit-Sonex Upgrade: $1,900
     
  • Machined Angle Component Kit-Sonex Upgrade when ordered with Optional Pre-Assembled Main Wing Spars ($2,200 Upgrade): $1,700
Waiex Complete Airframe Kit Upgrades:
  • Machined Angle Component Kit-Waiex Upgrade: $2,100
     
  • Machined Angle Component Kit-Waiex Upgrade when ordered with Optional Pre-Assembled Main Wing Spars ($2,200 Upgrade): $1,900
Xenos Complete Airframe Kit Upgrades
  • Machined Angle Component Kit-Xenos Upgrade: $1,300
     
    Note that these are only parts common among Xenos, Sonex and/or Waiex (Qty 43 parts illustrated in table below). There are Qty 48 Xenos-specific parts that Xenos builders must fabricate from raw extruded aluminum angle stock.

Parts Now Available for Individual Sale: Click on a part number or description below to order. You must be logged-in as a Sonex Aircraft plans owner to view this product category.

Machined Angle Component Kit Parts List
Part Number Description Qty
(Sonex)
Qty
(Waiex)
Qty
(Xenos)
Price Each

SNX-D02-14

Hook Angle 1 1 1 $31.00

SNX-F03-05L

LH Angle Fitting 1 1 1 $8.00
SNX-F03-05R RH Angle Fitting 1 1 1 $8.00
SNX-F03-06L LH Attach Fitting 1 1 0 $15.50
SNX-F03-06R RH Attach Fitting 1 1 0 $15.50
SNX-F08-08 Flap Detent Angle 1 1 0 $39.00
SNX-F08-10 Forward Attach Angle 1 1 1 $8.00
SNX-F08-11 Aft Attach Angle 1 0 0 $12.00
SNX-F10-03 Angle 1 0 0 $39.00
SNX-F10-05L LH Seat Belt Attach 1 1 1 $15.50
SNX-F10-05R RH Seat Belt Attach 1 1 1 $15.50
SNX-F10-06 Hook Mount 1 0 0 $31.00
SNX-F10-18L LH Pivot Angle 1 1 1 $15.50
SNX-F10-18R RH Pivot Angle 1 1 1 $15.50
SNX-F10-19 Attach Angle 1 0 0 $8.00
SNX-F13-03L LH Upper Longeron 1 1 1 $62.00
SNX-F13-03R RH Upper Longeron 1 1 1 $62.00
SNX-F13-06L LH Lower Longeron 1 1 1 $46.50
SNX-F13-06R RH Lower Longeron 1 1 1 $46.50
SNX-F14-02L LH Forward Angle 1 1 1 $23.50
SNX-F14-02R RH Forward Angle 1 1 1 $23.50
SNX-F14-07L LH Rudder Pedal Angle 1 1 1 $23.50
SNX-F14-07R RH Rudder Pedal Angle 1 1 1 $23.50
SNX-F14-08L LH Fwd Wing Attach 1 1 1 $39.00
SNX-F14-08R RH Fwd Wing Attach 1 1 1 $39.00
SNX-F14-09L LH Aft Wing Attach 1 1 1 $39.00
SNX-F14-09R RH Aft Wing Attach 1 1 1 $39.00
SNX-F14-11L LH Gear Attach Angle 1 1 0 $23.50
SNX-F14-11R RH Gear Attach Angle 1 1 0 $23.50
SNX-F14-12L LH Seat Belt Attach 1 1 1 $31.00
SNX-F14-12R RH Seat Belt Attach 1 1 1 $31.00
SNX-F14-13L LH Horizontal Angle 1 1 1 $23.50
SNX-F14-13R RH Horizontal Angle 1 1 1 $23.50
SNX-F15-01L LH Upper Motor Mount 1 1 1 $47.00
SNX-F15-01R RH Upper Motor Mount 1 1 1 $47.00
SNX-F15-02L LH Lower Motor Mount 1 1 1 $47.00
SNX-F15-02R RH Lower Motor Mount 1 1 1 $47.00
SNX-F15-04L LH rudder Pedal Mount 1 1 1 $39.00
SNX-F15-04R RH rudder Pedal Mount 1 1 1 $39.00
SNX-F15-07L LH Flap Drive Mount 1 1 0 $15.50
SNX-F15-07R RH Flap Drive Mount 1 1 0 $15.50
SNX-F15-12L LH Angle Clip 1 0 0 $24.00
SNX-F15-12R RH Angle Clip 1 0 0 $24.00
SNX-F16-04 Support Angle 1 1 1 $39.00
SNX-F16-06L LH Vertical Angle 1 1 1 $23.50
SNX-F16-06R RH Vertical Angle 1 1 1 $23.50
SNX-F16-09 Upper Fwd Cross Tie 1 1 1 $27.00
SNX-F16-10 Lower Forward Cross Tie 1 1 1 $31.00
SNX-F22-05 Aft Angle 1 1 0 $27.00
SNX-F22-06 Forward Angle 1 1 0 $15.50
SNX-F23-03 Forward Lower Mount 1 1 0 $39.00
SNX-F23-04 Aft Lower Mount Angle 1 1 0 $31.00
SNX-L05-07 Pivot Angle 1 1 0 $15.50
SNX-T03-03 Attach Angle 2 0 0 $31.00
SNX-T12-05 Angle 1 0 0 $39.00
SNX-W11-05 End Attach Angle 2 2 0 $23.50
SNX-W11-07 Root Attach Angle 2 2 0 $23.50
SNX-W11-10L LH Tie Down Fitting 1 1 0 $8.00
SNX-W11-10R RH Tie Down Fitting 1 1 0 $8.00
SNX-W11-11 Outboard Vertical Stiffener 2 2 0 $12.00
SNX-W13-02L LH Root Rib Attach 1 1 0 $23.50
SNX-W13-02R RH Root Rib Attach 1 1 0 $23.50
SNX-W20-02 Root Rib Attach Angle 2 2 0 $54.50
SNX-W20-03 Root Rib Attach Angle 2 2 0 $54.50
SNX-W21-03 Upper Angle 1 1 0 $23.50
SNX-W21-04 Lower Angle 1 1 0 $23.50
SNX-W21-06 Upper Angle 1 1 0 $23.50
SNX-W21-07 Lower Angle 1 1 0 $23.50
WIX-F03-09 Stiffener Angle 0 1 0 $39.00
WIX-F08-09 Aft Attach Angle 0 1 0 $39.00
WIX-F10-03 Angle 0 1 1 $39.00
WIX-F10-19 Attach Angle 0 1 1 $10.00
WIX-F23-02 Upper Attach Angle 0 1 0 $12.00
WIX-F25-06L LH Pulley Bracket 0 1 1 $31.00
WIX-F25-06R RH Pulley Bracket 0 1 1 $31.00
WIX-F29-03 Bracket 0 1 1 $31.00
WIX-F29-04 Bracket 0 1 1 $31.00
WIX-F29-05 Bracket 0 1 1 $31.00
WIX-F29-06 Bracket 0 1 1 $31.00
WIX-T09-04 Lower Attach Angle 0 1 0 $19.50
WIX-T09-05 Upper Attach Angle 0 1 0 $19.50
WIX-T11-05L LH Root Rib Clip 0 1 0 $12.00
WIX-T11-05R RH Root Rib Clip 0 1 0 $12.00
WIX-T11-06L LH Clip 0 1 0 $15.50
WIX-T11-06R RH Clip 0 1 0 $15.50
Machined Angle Component Wing Kit Parts List
(these parts not needed if ordering Pre-Assembled Main Wing Spars)
Part Number Description Qty
(Sonex)
Qty
(Waiex)
Qty
(Xenos)
 
SNX-W11-01 Lower Angle 2 2 0 $54.50
SNX-W11-08 Upper Stiffener Angle 2 2 0 $31.00
SNX-W11-09 Vertical Stiffener Angle 2 2 0 $23.50

Back to Airframe Kits page

© Copyright Sonex Aircraft, LLC -- All Rights Reserved

Subscribe to Sonex and AeroConversions Mailing Lists and News Feeds